Dimensions of the protective strip: 16.4 feet/197 inches Length
1. Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing.
2. Uncover the tape from the tip of the lining (Ensure the tape is install INSIDE the door) and peel the sticker off the tape by approximately 2 inches.
3. Start from the top, insert the lining onto your door edge until the lining is fully seated.
4. Press the lining with your thumb along the door edge until it is fully seated, then pull the red strip off.
5. Repeat step 4 until all edges are protected.
6. Use scissors to cut away unused lining for other door edges.
7. Let the lining dry up by itself and DO NOT get wet for at least 12 hours.
16.4ft High Quality Protective Trim x 1
Installing Tool x 1
OPP Bag x 1
Reasonable design for protecting your car door:?This car protective trim will protect your car door edge from chips,scratches,abrasion and most types of environmental damage.Thick,flexible and soft,easily protect your car.
High quality material,will last for a long time:?Made from durable rubber,waterproof and UV protected. Will not fade or harm the paint finish. Thick enough to protect the car door edge.
A pratical car set,very easty to install,Save Time and Effort:?Including a installing tool which can help you install the protective strip without burden.More easily than installing those strips with your hand only. And the scraper(installing tool) can be used as a home tool, you can use it in other purposes after the installation.
Will not affect the appearance,a good decoration you deserve to have:?Can be used which are around the car door edge and the place around the window.
Multipurpose for you car in daily life:?Not only can be used as a decoration for the car door, but also has many functions.Reduce the collision,Isolator noise,Corrosion resistance,prevent painting peel off,high temperature resistance,UV resistance for the installed door edge.